DC UPS All In One

DC UPS for system critical applications and remote locations

Power Supply, Battery Charger and UPS all in one unit, with integrated battery and system diagnostic.

Diagnostic system

Device operation, as well as battery status, are constantly monitored by the integrated diagnostic feature.

Data are logged in the internal memory and can be remotely accessed.

Alarm goes off in case device or battery anomaly

Setup Flexibility

Battery Maximum charging current setting

Adjustable backup time

Battery type: works with all battery types

Start from battery (without mains)

Selectable output voltage

Communication protocol

3 times output power boost

Double output current when battery is charged

Up to three times rated output current for 4 seconds.

Serial communication

Modbus or CANbus protocol communication

Remote device setting, also during operation

Data logging

DPY Display connection

Technical specs

From 2.5A to 20A

12V, 24V and 48V versions and also 12/24V selectable

Operating temperature range from -25°C to +70°C

115, 230, 277, 400 and 500Vac Input

Battery temperature compensation input

CE an UL Listed

Feature Highlights

Power boost 2 x In Continuous or 3 x In for 4s

Battery and device failure outputs

4 + 1 Battery charging stages

Battery recovery function

All in one: UPS, Battery Charger and power supply

Find out more about “DC-UPS” uninterruptible power supply solutions

CBI all in one

CBI 24V

CBI243A – 3A

CBI245A – 5A

CBI2410A – 10A

CBI2420A – 20A

CBI 48V

CBI485A – 5A

CBI4810A – 10A

CBI 12V

CBI123A – 3A

CBI126A – 6A

CBI1210A – 10A

CBI1235A – 35A

CBI 12/24V

CBI2801224A – 280W

CBI 24V

CBI243A – 3A

CBI245A – 5A

CBI2410A – 10A

CBI2420A – 20A

CBI 48V

CBI485A – 5A

CBI4810A – 10A

CBI 12V

CBI123A – 3A

CBI126A – 6A

CBI1210A – 10A

CBI1235A – 35A

CBI 12/24V

CBI2801224A – 280W

Battery Banks and Enclosures

Our battery banks are available either with our own selected and recommended, fully tested hassle free battery or just the empty enclosure with included terminal connection, wiring and DIN rail mounting, inside which you can allocate your preferred battery, according to the device specs to which is going to be connected.

Both solutions will allow to carry-out an easy and neat installation on DC continuity applications

BAT1.2 VRLA

24V 1.2Ah
62 x 175 x 120
1.5kg

BAT3.4 VRLA

24V 3.4Ah
82 x 200 x 160
3kg

BAT7.2 VRLA

24V 7.2Ah
145 x 210x 130
5.5kg

BAT12 VRLA

24V 12Ah
210 x 210 x 210
9kg

Get more information

If you are interested, have any doubts or questions, please fill out the form. We will get back to you as soon as possible.

10 + 8 =